VR Tuned ECU Flash Tune Toyota Supra A90 3.0L Turbo 335hp 2020-2021

The Toyota Supra A90 3.0 Turbocharged ECU tune is available from VR Tuned.  The BMW B58 engine has tons of performance to give.  This is what the VR Tuned ECU Flash unleashes.  Tuning the cars entire map range, we gain some very impressive numbers on both 91 and 93+octane.  Increasing boost pressure, adjusting fuel and timing, changing torque limiters, and more are done with an ECU Flash.  VR Tuned is able to flash your Supra ECU on the bench without opening up.  This is done in what is called Bosch Service Mode as pictured.  This form of ECU flashing helps to keep you warranty safe from others which crack open the ECU. With the ECU flash not only do you gain horsepower and torque, driving characteristics are vastly improved giving you improved throttle response and better driveability.

Crank Horsepower Ratings:

• Stock Power 335hp | 369ft/lbs
• Tuned Power 400hp | 450ft/lbs

Peak Gains 93 Octane Stock Car:

• 80rwhp at 5500rpm
• 70ft/lbs at 4200rpm

Peak Gains on 91 Octane Stock Car:

• 60rwhp at 5500rpm
• 70ft/lbs at 4200rpm

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• For gasoline vehicles, if you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not open, solder, or modify the ECU board at all. Connections are done directly to the pins on the front of ECU.

For reference, this ECU is a Bosch MG1CS201.