VR Tuned ECU Flash Tune Jaguar XFR X250 5.0L V8 Supercharged 510HP 09-15

The Jaguar xFR ECU flash is the only way to go when looking for more power out of the flagship performance sedan. Like any forced induction vehicle, it stands very strong to gain big with a ECU Tune. The VR Tuned upgrade adds more horsepower and torque over stock. The ECU flash can be used with the factory supercharger pulley or a reduced mass pulley for increase of boost.  With our ECU calibration, you are able to gain improved performance on the engine. Where your car is sluggish off the line, your newly flashed car picks up right away and pulls harder through the mid and top end RPM range. Overall, the driving characteristics are vastly improved while providing you additional benefits that your car craves for.

Crank Horsepower Ratings:

• Stock Power: 510 HP | 461 lb-ft
• Stage 1 Power: 556HP | 513 lb-ft
• Stage 2 Power: 600HP | 550 lb-ft

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• Use the Alientech Powergate 3+ handheld device. This device is a touchscreen module that lets you store your original and tuned files to easily flash between them. See Instructions Here.
• Use the DimSport handheld device. This REQUIRES a Windows PC. This is an OBDII tool to read and write the ECU. See Instructions Here.
• Bring your vehicle to our facility where we can use our Master Tool to flash your vehicle.
• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for re-installation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.

Options:

• You can select to get both Stages of our Tune.  The Stage 2 is usually for those looking to maximize the performance of their vehicle.  Though not required unless stated, this is usually for those running a performance exhaust and at least 91-93 octane fuel. Can only be done if OBDII flashing is available.

For reference, this ECU is a Denso P5.0SC from 2009-2012 and a MED17.8.31 from 2013-2015.