VR Tuned ECU Flash Tune Ford F-150 3.5L V6 EcoBoost 370HP

Tuning the ECU of your Ford F-150 3.5L EcoBoost is possible with VR Tuned. Our ECU Upgrade transforms your car to a new level offering a more enhanced driving experience. With our upgrade you gain quicker throttle response, increased torque, and more horsepower with top end pull to redline. Overall, the driving characteristics are vastly improved while providing you additional benefits that your car craves. An ECU flash gives you reliable performance when you need it most!

Crank Horsepower Ratings:

Stage 1

• Stock Power: 370HP | 420FT/LB
• Tuned Power: 450HP | 530FT/LB

Stage 2 (with Agency Power Intake)

• Stock Power: 370HP | 420FT/LB
• Tuned Power: 475HP | 550FT/LB 

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• If you add higher octane fuel, the ECU will adjust accordingly. (91 octane is recommended)
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• Use the Alientech Powergate 3+ handheld device. This device is a touchscreen module that lets you store your original and tuned files to easily flash between them. See Instructions Here.
• Use our OBDII VR Tuned iFlash Cable. This REQUIRES a Windows PC. The iFlash cable allows you to read and write your stock and tuned files. See Instructions Here.
• Use the DimSport handheld device.  You can flash between these at anytime.  See Instructions Here.
• Bring your vehicle to our facility where we can use our Master Tool to flash your vehicle via the OBDII port. 
• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.

For reference, this ECU is a FoMoCO Bosch MEDG17.0.