VR Tuned ECU Flash Tune McLaren MP4-12C Coupe | Spyder

Tuning the ECU of your McLaren MP4-12C V8 turbo engine is possible with VR Tuned. The driving characteristics are vastly improved while providing you additional benefits that your engine craves for. With additional programming to adjust your ecu calibrations, quicker turbo spool, more horsepower, increased torque, and better throttle response are all benefits. Attached dyno numbers shown are on 91 octane, tested on a Mustang AWD Dyno. The test car was our own Project McLaren 12C 2012 car. The Mustang Dyno has a typical drivetrain loss of 20% in all wheel drive. AWD is used to not confuse the sophisticated traction control systems. Once flashed, the 12C becomes an outright monster. The vehicle is still easy to drive, but testing at a 1/2 mile race did 168mph! The ECU flash is one of the best mods you can do to the McLaren 12C.

Crank Horsepower Ratings:

• Stock Power: 616HP | 486FT/LB
• Tuned Power: 700HP | 600FT/LB

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for re-installation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection. ECU Removal Instructions Here

For reference, this ECU is a BOSCH ME17.8.32 ECU.