VR Tuned ECU Flash Tune Mini Cooper S R56 | R57 1.6L Turbo 07-10

The Mini Cooper S featuring the 1.6L turbocharged engine is an incredible car to drive and even more fun with a VR Tuned ECU Flash. The R56 | R57 chassis makes it extremely popular amongst enthusiasts because of its power and performance. The VR Tuned ECU flash adds more horsepower and torque while greatly improving the overall driveability. Simple bolt on upgrades such as an exhaust, downpipes, intake and intercooler will make your Mini that much quicker! Better throttle response, quicker turbo spool, and stronger pull to redline are all characteristics of the ECU Flash.

Crank Horsepower Ratings:

• Stock Power: 175 HP | 177 ft/lbs
• Stage 1 Power: 210 HP | 229 ft/lbs
• Stage 2 Power: 230 HP | 252 ft/lbs

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• Use the VRTuned iFlash OBDII device. This REQUIRES a Windows PC.  You can flash between the stock and tuned at anytime. See Instructions Here.
• Bring your vehicle to our facility where we can use our Master Tool to flash your vehicle via the OBDII port.
• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for re-installation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.

Options:

• You can select to get one or both Stages of our Tune.  The Stage 2 is usually for those looking to maximize the performance of their vehicle.  You must run a performance exhaust and 93+ octane. Switching between files can only be done with our OBDII flashing tool.
• For this ECU Flash, we also offer the following features that are optional and can be selected:
• Pops and Bang Burble Tune
• Speed Limiter Raised - VMax
• Some features not listed can be requested during the File Upload process

For reference, this ECU is a BOSCH MED17.2 for the 2007-2010 models only.