VR Tuned ECU Flash Tune Audi TT RS 2.5 TFSI 8J 340hp 2006-2014

Your Audi TT RS is the best Audi has to offer in performance and handling. However with our ECU flash, you get quicker throttle response, increased torque, faster turbo spool, and top end that pulls very hard to redline. The VR Tuned upgrade adds more horsepower over stock. Simple bolt on upgrades such as an exhaust, downpipes, intake, intercooler can make your car that much quicker. Overall, the driving characteristics are vastly improved while providing you additional benefits that your car craves.

Crank Horsepower Ratings:

• Stock Power: 340HP | 332ft/lbs
• Stage 1 Tuned Power: 370HP | 376ft/lbs
• Stage 2 Tuned Power: 390HP | 402ft/lbs

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• Use the Alientech Powergate 3+ handheld device. This device is a touchscreen module that lets you store your original and tuned files to easily flash between them. See Instructions Here.
• Use the DimSport handheld device. This REQUIRES a Windows PC.  You can flash between these at anytime.  See Instructions Here.
• Bring your vehicle to our facility where we can use our Master Cable to flash your vehicle.
• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.

Options:

• You can select to get both Stages of our Tune.  The Stage 2 is usually for those looking to maximize the performance of their vehicle.  Though not required unless stated, this is usually for those running a performance exhaust and at least 91-93 octane fuel. Can only be done if OBDII flashing is available.

For reference, this ECU is a BOSCH MED9.1.5.